Analisis Distribusi Temperatur Koefesien Perpindahan Panas pada Sistem Pendingin (Simulasi) Menggunakan Porous Media dengan Variasi Porositas

Authors

  • Ahmad Hamim Su'udy Universitas Brawijaya Malang
  • Eko Siswanto Jurusan Teknik Mesin Fakultas Teknik Universitas Brawijaya
  • Rudy Soenoko Jurusan Teknik Mesin Fakultas Teknik Universitas Brawijaya

DOI:

https://doi.org/10.21776/ub.igtj.2018.007.02.04

Abstract

The internal combustion engine is a fairly old machine and currently has many alternative energy which apparently has not been able to shift the role of the internal combustion engine, for the cooling system in the internal combustion engine greatly affect the performance and if not handled properly will cause something fatal, ie when the engine is too hot it can cause over heating and the machine can not work anymore. For Cooling system has been using fin and radiator. Research continues to grow in terms of heat transfer, ie by using porous media. Presence of porous media cooling system is expected to replace the role of fin and radiator easier maintenance and able to transfer heat well. In this case the research is assisted by simulation to see the temperature distribution that occurs in porous media with variation of 10%, 15%, 20% 25%, 30% The result of research by using simulation shows that the porosity value of porous media, the temperature distribution value also greater than. then the higher the porosity value the value (h) the heat transfer coefficient will be low.

Keywords: Heat Transport, Porosity, Temperature

Downloads

Published

16-05-2018

Issue

Vol. 7 No. 2 (2018)

Section

Articles

License

Authors who publish in this journal agree to the following terms: 

  1. Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
  4. Once submitted, it is the corresponding author's responsibility to confirm and warrant the name included as an author of the work is true (shadow author is unacceptable) and that no conflict of interest occurred among the authors.